The WZ model is Specifically designed for. WindZilla installed into the Patriot.The WindZilla, Blades, Hub, Nose Cone and Tail. Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. Home owners have since adpoted to DIY wind projects. However, the task of building a wind turbine from ground up is no easy task.
Most DIY wind turbines availalbe in the market today have a lot of mechanical flaws and are not visually attractive. Not only does the unsightly turbine attracts much complains, but flaws that were never addressed will result in frequent maintenance and headaches, which eventually leads to abandonment / cancelation of the project. Since there are a lot of room for imporovment, we have designed a new wind turbine - the Patriot to bring things up to par. To name a few, this turbine features Built-in Slip Ring to prevent cable tangling, Anti vibration system to increase power efficiency. More details / features will be available below.What is the difference in an. GreenergyStar's Patriot Wind Turbine is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with.
It is designed to work with other. Products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features.
For those who are serious about wind power generation, this is a must have upgrade. Never again will the cable get twisted up. Never again will you have to climb up the ladder and fix the tangles. With Slip Ring No more tangles! Without Slip Ring Do you really want to untangle this every month?
40'C to 100'C. M22x1.5 22mm diameter 1.5mm Thread Pitch.
High voltage / current carrying capacity - Copper-graphite brushes ensure long life even under extreme load conditions - Quick connector for fast connection to the AC / DC wind turbine see reference picture below - Insulated with fiberglass sleeves to protect wires to the wind turbine and make the installation professional and tidy - Easily taken apart for quick maintenance - 2x High Quality Metal Sealed Ball bearing to stabilize axle. Built-in Tower Adapter with Anti Vibration & Fictionless Rotation System.
With Dual Bearing - Dual Metal ball bearing to prevent vertical vibration - Yaw shaft diameter: 40mm - 3cm of stabilizing distance with 2 bearings - No vibration = Increase in efficiency - Reduction in noise output - One piece design Yaw body provides more stability. Without Tower Adapter / Bearing - When there is no tower adapter, it makes installation harder than it has to be -Without bearing, metal connection / joints will grind on each other and wear out - Plays will get larger and turbine will vibrate during operation. Pros - Unlike rubber, PVC Rings are much more durable will not harden and crack and cause leaks - Bearing / Slip rings are covered and will not rust / leak / short circuit.10.83kg (23.88 lb). Yaw Body / Tower Mount Inner Diameter. 53.3mm, 2.1 inch. 1.5 inch schedule 40 pipe Actual Pipe diameter: 48mm (1.9 inch) Recommend adding 2.5mm padding. Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury.
Under no circumstances should you install the turbine where a person could come in contact with moving rotor blades. The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products. Any unauthorized disassembly, repair, or modification.
NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted. The item "Patriot-WZ Wind Turbine Generator Body Mounting + Slip Ring for PMA Alternator" is in sale since Saturday, August 3, 2013. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "hi_iq" and is located in Point Roberts, Washington.
This item can be shipped to United States, Canada.