3KW Helix Wind Turbine Generator Kit 12V 24V 48V MPPT Controller Power Inverter

  

Car Truck Parts & Accessories. 3KW 48V Wind Power Turbine Generator Kit MPPT Controller Home Farm Boat Windmill. 3KW 12V/24V Wind Power Turbine Generator MPPT Controller Home Farm Boat Windmill. Cordless Vacuum Cleaner 3in1 Lightweight Stick Handheld Powerful Brushless Motor.

3in1 Cordless Stick Vacuum Cleaner Upright Handheld Bagless Hoover Lightweight. 1 Pair WIFI Wireless Transmitter Receiver XLR Connection 2.4GHz For Microphone.

10PCS RGB GU10 LED Light Bulbs Spotlight Colour Changing Down Light 4W W/ Remote. 10PCS RGB MR16 LED Light Bulbs Spotlight Colour Changing Down Light 4W W/ Remote. 3KW Helix Wind Turbine Generator Kit 12V 24V 48V MPPT Controller Power Inverter. The Wind Turbine with the Coreless Permanent Magnet Generator and Three High-strength Fiberglass Blades Is More Durable and Has a Long Service Life. The Spiral Blades Are Aerodynamically Designed to Make the Rotor Run Smoothly and Reliably, Which Leads to Stable Electricity Generation.

Besides, It Has Maximum Speed Protection. It Is Well Suited for Boats, Gazebos, Cabins or Mobile Houses, and Other Energy Supplies for Homes, Businesses and Industry. The Double Bearing and Low Vibration Also Ensure More Stable Operation.

Drawing on the Design Principle of Aircraft Wings and the Horizontal Plane Rotation, Noise Can Be Reduced to a Level That Cannot Be Measured in the Natural Environment. Generating Electricity at Lower Wind Speeds. Due to Its Compact Shape, Low Starting Wind Speed, and Large Windward Area, the Wind Turbine Can Generate Electricity at Lower Wind Speeds. The Horizontal Rotation Brings Small Wind Pressure so That It Can Resist a Super Typhoon. When the Wind Turbine Reaches the Maximum Speed of 300rpm, It Will Automatically Brake.

Everything You Need for Installation Is Included. The Wind Turbine with a User-friendly and Convenient Flange Design Is Easy to Install.

Its Starting Wind Speed Is Lower than Other Wind Turbines, and the Rising Arc of Power Generation Is Gentle, so It Can Generate More Power than others within a certain range. The Main Force Point of the Wind Turbine Is Concentrated on the Blade Edge, so That It Can Effectively Avoid Blade Shedding, Fracture, or Flying out. Three-phase Ac Permanent Magnet Generator.

The Wind Turbine with a Low-torque and High-power Intelligent Tracking Microprocessor Can Regulate Current and Voltage. It Significantly Increases Wind Energy Utilization and Annual Power Production. The Main Rod Is Made of Aluminum with High Hardness and Can Be Fully Recycled, so It Is Uneasy to Break and Eco-friendly. Specification: Condition: New Controller System: Electromagnetism Starting Wind Speed: 2.5m/s Cut-in Wind Speed: 2.5m(98inch)/S Rated Wind Speed: 18m/s Max Instantaneous Wind Speed:? 40m(1575inch)/S The Instantaneous Maximum Wind Speed:?

45m(1772inch)/S Blades Quantity: 3 Diameter of Blades: 0.6m/24inch Blades Height: 0.8m/31inch Speed Regulation: Automatic Rated Voltage: 12V/24V Max Power: 3000W Generator Protection Grade: IP67 Work Environment Temperature: -40-+60? Check All the Parts of the Wind Turbine, Which Includes 6 Brackets and 3 Blades in Total. Place the Wind Turbine Vertically. Connect Brackets with Blades by the Bolt. Load the Upper Cover Plate and Lower Cover Plate.

Fix the Bolt in the Mounting Hole (at the End of the Bracket) from the Outside of the Wind Blade. Tighten All the Bolts of Blades and Brackets, and Toggle the Blades. It Should Not Have Abnormal Noise or Jamming. Tighten the Nut (Under the Upper Cover Plate of the Wind Turbine) to Make the Upper Cover Plate Tightly Fixed. Align the Flange Hole of the Wind Turbine with the Flange Hole on the Tower Pole, Put on Flat Washers and Spring Washers, and Tighten the Nut.

Professional Installation Is Highly Recommended If You Have No Previous Installation Experience. You Can Watch the Attached Installation Video As a Reference. We Will Reply and Solve the Problem for You As Soon As Possible.

Package Included: 1 X Wind Turbine 1 X Controller 3 X Blades 1 X Bag of Screws to Connect the Main Body 1 X Bag of Screws for Connecting the Bracket Blades Other Accessory for Assembly. There Are Two Different Kinds of Screws.

Please Confirm the Correct Position of the Screws Before Installation. The Upper Cover Plate of the Wind Turbine Does Not Need to Be Tightened, and the Blades Can Be Properly Adjusted Upward or Downward During Installation. When You Place the Wind Turbine Vertically, Please Prevent the Bottom Flange from Crushing the Output Wire. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering. The controller, screws and flange are fixed in the foam. This kind of wind solar hybrid street light controller is a special design for small off-grid devices where wind generators and solar panels charge batteries safely and efficiently.

Functions: Wind generator MPPT boost charging function. Wind PWM dump load, external dump load resistor, intelligent solar charge separation. Dual power supply function: battery + solar power supply. LCD displays parameters such as voltage and current of wind, sun and load.

Some parameters can be set by the user. DC output with 3 output modes. The inner circuit board of the controller is sprayed with protective paint to prevent dust, moisture and static electricity. Features: Wind MPPT charging method, ensure the power get max input into the battery and high charging efficiency. Can be used for 2000W wind turbines with high compatibility. Independent Boost Circuit: The charging efficiency of the low-power vertical wind generator has been solved. Mini size, easy to install. LCD display with visible and intuitive parameters. This manual is intended for people who need to install and operate the controller. Read this manual before doing any work on the controller and keep it in a safe place. The content of this manual is regularly updated or revised as necessary. However, deviations cannot be ruled out. Please refer to the actual product(s). General Safety Information: Before you receive the product, please check it carefully. Make sure the product has not been damaged in transit. If it is damaged, contact the carrier or our company immediately. All installation and electrical work may only be carried out by qualified personnel.

Do not disassemble or attempt to repair the controller without professional guidance. Do not use the controller without batteries. Do not disconnect the controller and batteries when the controller works normally. Keep children away from the controls.

Do not allow water to get into the controller. Ensure power connections are tight to avoid excessive heating from a loose connection. Make sure the cables are appropriate for the system. Max continuous power: 2000W NO Load Power Rate.

85% High Voltage Cut Off Level: 15 +/- 1V, 30V+/-1V Low Voltage Alarm Level: 11V+/-0.1,21V+/-0.1V Low Voltage Cut Off Level: 10.5 +/- 0.3V, 20V+/-0.3V Input Voltage: AC 12V, AC 24V, AC 48V (according to your choose) USB: 2 THD:? 5% Size: 20011656 mm Weight: 1.25kg Package Include: 1 x Power Inverter. Your item will be posted by.

If you do not receive your item after 15 days. Please read our terms and conditions above carefully. If you are satisfied with our products and service, please leave us.

And we will do the same for you. We'll do reply you as soon as possible and try our best to solve your problems out. Believe us, every customer is taken as our important treasure. Q1: What can I do if I haven't received my item in time? Q2: How can we process if I'm not satisfied with your product? PS: The return reasons are not important, as no matter which one you select, we need to further confirm the details through message. Your Satisfaction is our Highest Priority. Our Working time (Monday to Friday): -09:00-12:00(GMT+8) -14:00-18:00(GMT+8). Saturday: -09:00-12:00(GMT+8) -14:00-17:00(GMT+8). All emails would be replied very fast during our working time, emails would be replied within 24 hours usually during holiday.