3KW 12V/24V/48V Vertical Axis Power Boost Wind Turbine Generator with Controller

  
The wind turbine with the coreless permanent magnet generator and three high-strength fiberglass blades is more durable and has a long service life. The spiral blades are aerodynamically designed so that the rotor runs smoothly and reliably, resulting in stable power generation. The double bearing and low vibration ensure more stable operation. Thanks to the design principle of airplane wings and rotation in a horizontal plane, noise can be reduced to a level that cannot be measured in the natural environment.

Generation of electricity at lower wind speeds. Due to its compact shape, low starting wind speed and large wind-facing surface, the wind turbine can generate electricity even at lower wind speeds. The horizontal rotation brings low wind pressure, so it can withstand a super typhoon.

When the wind turbine reaches the maximum speed of 300rpm, it will automatically slow down. Everything you need for installation is included.

The wind turbine with a user-friendly and practical flange design is easy to install. The starting wind speed is lower than other wind turbines, and the rise of power generation is smooth, so it can generate more power than others within a certain range. The main force point of the wind turbine is concentrated on the blade edge, so that blade shedding, breaking or flying out can be effectively avoided. Three-phase AC permanent magnet generator.

The wind turbine with an intelligent tracking microprocessor with low torque and high power can efficiently regulate current and voltage. It greatly increases wind energy utilization and annual electricity production. The main pole is made of aluminum with high hardness and can be fully recycled, so it is inconvenient to break and environmentally friendly.

Starting wind speed: 1.3m(12inch)/s. Switched on wind speed: 2.5m(98inch)/s. Rated wind speed: 11m(433inch)/s. The instantaneous maximum wind speed:?

Blades quantity: 3 (with different colors). Diameter of the blades: 0.6m/24inch. Height of the blades: 0.8m/31inch. Protection class of the generator: IP67. Protection against overspeed: Electromagnetic brake.

Material of the blade: fiberglass. Check all parts of the wind turbine, which includes a total of 6 brackets and 3 blades. Position the wind turbine vertically.

Connect the brackets to the blades using the screws. Place the top and bottom cover plates on top. Fasten the screw in the mounting hole (at the end of the bracket) from the outside of the wind turbine. Tighten all screws of the blades and the bracket and switch on the blades.

There should be no unusual noises or blockages. Tighten the nut (under the top cover plate of the wind turbine) to secure the top cover plate.

Align the flange hole of the wind turbine with the flange hole of the mast, place washers and lock washers and tighten the nut. Professional installation is strongly recommended if you have no experience with installation. You can watch the attached installation video for reference.

We will reply and solve the problem for you as soon as possible. 1 x Bag of screws for connecting the main body. 1 x Bag of screws for connecting the blades of the bracket. There are two different types of screws. Please check the correct position of the screws before installation.

2 The top cover plate of the wind turbine does not need to be tightened, and the blades can be properly adjusted up or down during installation. 3 When installing the wind turbine vertically, please prevent the bottom flange from crushing the output cable. Please allow the slight color difference caused by shooting light and 1-3 cm error due to manual measurement, and make sure you don't mind before you order. All items location on California, USA. Days for your order to arrive.

If you do not receive your item after 20 days. Please read our terms and conditions above carefully. If you are satisfied with our products and service, please leave us.

And we will do the same for you. We'll do reply you as soon as possible and try our best to solve your problems out. Believe us, every customer is taken as our important treasure. Q1: What can I do if I haven't received my item in time?

Q2: How can we process if I'm not satisfied with your product? PS: The return reasons are not important, as no matter which one you select, we need to further confirm the details through message. Your Satisfaction is our Highest Priority. Our Working time (Monday to Friday): -09:00-12:00(GMT+8) -14:00-18:00(GMT+8). Saturday: -09:00-12:00(GMT+8) -14:00-17:00(GMT+8).

All emails would be replied very fast during our working time, emails would be replied within 24 hours usually during holiday.