The horizontal rotation brings small wind pressure so that it can resist a super typhoon. Maximum Speed Protection: When the wind turbine reaches the maximum speed of 300rpm, it will automatically brake. Everything you need for installation is included.The wind turbine with a user-friendly and convenient flange design is easy to install. Its starting wind speed is lower than other wind turbines, and the rising arc of power generation is gentle, so it can generate more power than others within a certain range. The main force point of the wind turbine is concentrated on the blade edge, so that it can effectively avoid blade shedding, fracture, or flying out.
Three-phase AC Permanent Magnet Generator. The wind turbine with a low-torque and high-power intelligent tracking microprocessor can regulate current and voltage efficiently. It significantly increases wind energy utilization and annual power production.
The main rod is made of aluminum with high hardness and can be fully recycled, so it is uneasy to break and eco-friendly. Starting Wind Speed: 2.5m/s. Cut-in Wind Speed: 2.5m(98inch)/s. Max Instantaneous Wind Speed: =40m(1575inch)/s.
The Instantaneous Maximum Wind Speed: =45m(1772inch)/s. Blades Quantity: 3 (with Different Colors). Diameter of Blades: 0.6m/24inch. Work Environment Temperature: 25 to 45?
Check all the parts of the wind turbine, which includes 6 brackets and 3 blades in total. Place the wind turbine vertically.Connect brackets with blades by the bolt. Load the upper cover plate and lower cover plate. Fix the bolt in the mounting hole (at the end of the bracket) from the outside of the wind blade. Tighten all the bolts of blades and brackets, and toggle the blades. It should not have abnormal noise or jamming. Tighten the nut (under the upper cover plate of the wind turbine) to make the upper cover plate tightly fixed. Align the flange hole of the wind turbine with the flange hole on the tower pole, put on flat washers and spring washers, and tighten the nut. Professional installation is highly recommended if you have no previous installation experience. You can watch the attached installation video as a reference. We will reply and solve the problem for you as soon as possible. 3 x Blades (White, Red, Blue). 1 x Bag of Screws to Connect the Main Body. 1 x Bag of Screws for Connecting the Bracket Blades. There are two different kinds of screws. Please confirm the correct position of the screws before installation. The upper cover plate of the wind turbine does not need to be tightened, and the blades can be properly adjusted upward or downward during installation.
When you place the wind turbine vertically, please prevent the bottom flange from crushing the output wire. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them!
Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.
Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Low vibration, Low start wind speed. The instantaneous maximum wind speed.
This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "pengyizitwo" and is located in this country: US. This item can be shipped to United States.