Windzilla 24V AC MAX 1. 00W Wind Turbine Kit + 24V Charge Controller. +Dump Load For Land or Marine Use. This model is Specifically designed to work with our WindZilla PMA.24V charge controller is included. Dump Load is included Slip Ring is NOT Included. Over the last few decades renewable energy has started to gain its ground. Of all the different kinds of alternative energy sources available, the use of wind power has been growing steadily. Home owners have since adpoted to DIY wind projects. However, the task of building a wind turbine from ground up is no easy task. Most DIY wind turbines availalbe in the market today have a lot of mechanical flaws. Flaws that were never addressed will result in frequent maintenance and headaches, which eventually leads to abandonment / cancelation of the project. Since there are a lot of room for imporovment, we have designed a new wind turbine - the Patriot to bring things up to par. To name a few, Anti vibration system to increase power efficiency. More details / features will be available below. Yes, sealed exterior, ball bearing, coated rotor.
RPM at 2 4 V. 2.88kg (6.47 lbs). The above battery charging power curve is obtained from charging a 2 4 V 88Ah battery bank with our SolarWind Hybrid Charge Controller. (not included in this listing). What is the difference in a.GreenergyStar's WindZilla Wind Turbine is the most lightweight and easily assembled generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with other. Products such as the SolarWind Hybrid RX charge controller and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features. Built-in Tower Adapter with Anti Vibration & Fictionless Rotation System. With Dual Bearing - Dual Metal ball bearing to prevent vertical vibration - Yaw shaft diameter: 40mm - 3cm of stabilizing distance with 2 bearings - No vibration = Increase in efficiency - Reduction in noise output - One piece design Yaw body provides more stability. Without Tower Adapter / Bearing - When there is no tower adapter, it makes installation harder than it has to be -Without bearing, metal connection / joints will grind on each other and wear out - Plays will get larger and turbine will vibrate during operation. Pros - Exceptional Body Desig n to protect Slip Ring (not included) and Tower Adapter - Bearings are covered and will not rust / leak / short circuit. Pros - Compensates thrust forces from incoming wind - 5 degree Tilt Angle ensures the blades will never hit the tower during strong wind.
Color: Black - With 62" swept area when mounted on a 5.5" Hub - Incorporates highly efficient, true airfoil - Quiet performance with minimal vibration - Can generate 800 watts or more depending on PMA efficiency - Manufactured using a precision injection molding process that produces blades of exceptional consistency - Made with new thermoplastic to increase durability - Smoother and more durable than any blades you can find in the market - Adjustable blade degree with included degree adjusters / shims (see picture below) - High resistance to bending (over 150 degrees). What is Nylon 6.6? Nylon is a man made product. On the man made side, you will see primarily three types of thermoplastic. These are polyester, polypropylene, and nylon.
Of the three types, nylon is by far the better choice. Nylon is extremely versatile in its applications. It is highly resistant to abrasion and has excellent resilience. Within nylon, there are two groups: nylon 6 and nylon 6.6. Nylon 6.6 is the.
It is the thermoplastic that is most often specified by professional architects and designers because it provides the flexural strength, low-temperature toughness, UV Resistance and is the most resilient. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear.Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google.
Adjustable blade degree with included degree adjusters (Shims) Increase/decrease blade angle by installing degree adjuster under the blades "+" on the right side = Increase angle = More Torque, Less Speed "-" on the right side = Decrease angle = Less Torque, More Speed. Nylon 6.6 + Carbon Fiber. Stay true to wind with Light Weighted Body and Stylish Tail. 1 WindZilla Wind Turbine - 6x Blades - Hub with 6 lots - Body Plates - Tail - Screws and Nuts - Degree Adjuster - Allen Key - Instruction Manual.
9.5 kg (2 0.9 lb). Yaw Body / Tower Mount Inner Diameter. 53.3mm, 2.1 inch.
1.5 inch schedule 40 pipe Actual Pipe diameter: 48mm (1.9 inch) Recommend adding 2.5mm padding. Why do we need a Dump Load? As we all know, wind turbines are designed to operate in a loaded situation so it can generate power to either the battery / the grid. It is, however, not designed to operate under a no load (open circuit) situation because doing so will put a lot of strain on the wind turbine components and speeds out the wear out process which will eventually will lead the turbine to self destruct. Therefore, a dump load is required to burn out the extra energy when the battery is full OR when the grid is out.
Because of this, a dump load is also known as a "diversion load". This dump load is designed to work with GreenergyStar SolarWind Hybrid RX Charge Controller. It will work with the Apollo & Patriot Wind Turbines as well. Installation Reference - not to scale (No inverter, charge controller, batteries, turbines and solar panels included in this listing).
Specifically designed to work with GreenergyStar SolarWind Hybrid RX Charge Controller - Switch between 12V / 24V system - 2 fans active convection cooling system - LED to indicate if dump load is active - Finned case to efficiently dissipate heat - Consist of 4 high quality golden low temperature resistor. Dump Load Interior - High Quality golden low temperature resistor.
12V and 24 V switchable. Dimension (L x W x H).19.3 x 13.1 x 6.9 cm 7.5" x 5.2" x 2.7. High quality finned aluminum to act as heat sink for fast heat dissipation. RED, turns on when dumpload is active. Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a person could come in contact with moving rotor blades.
The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products. Any unauthorized disassembly, repair, or modification. NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND. 1800 W WindZilla PMA 24V AC 6 Blade Wind Turbine Generator+Cont.
All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. Please refer to S&H price list above for details. Usually it will take 45 days for bounce backs to return to us.
So, PLEASE make sure you address is correct. Items that are used/ damaged/ deformed or altered in any ways are not acceptable.
The item "1.8KW 24V AC 6 X 62 Black Blade Wind Turbine Generator+Controller+ Dump Load" is in sale since Sunday, July 2, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "goodsgood" and is located in Point Roberts, Washington.This item can be shipped worldwide.