Many canyons and mountain passes only have mono directional. Wind so it makes sense in these places to install a stationary windturbine.
If you are lucky enough. To live in an area that only has mono directional winds then installing a "Wind Slave" makes sense. Can simply be lag bolted into a tree, wooden pole or even the side.
No need for expensive wiring or complicated towers, OR, . If you wish, mount your wind-slave on a swivel mounting bracket. Building your own tail is easy too! Does not include any mounting hardware!You can fasten onto steel pipe drill it then bolt it. Put a string or ribbon below the turbine then you know direction of the wind.
Pole can be twisted to direction of the wind make sure you dig a deep hole of at least 3ft weld a plait on the botton of the tube then fit hole with rocks to secure tower. Ideal for hillbilly power fitted in no time at all.
Cable can be run down the pole or timber no worry about winding cable up this time just fasten direct from top to bottom. Using a good cable tie or clip.Weld 2 handles on the pole approx 4 to 5ft from floor so that you can twist the tower into direction of the wind. You may fit guy wires to keep the tower level. Because 98% of prevailing winds. Only from one direction for many people. And in many parts of the world.
For seasonal wind changes your 4x4 mounting post. Decking timber is treated and very strong and flexible you can use 6x4.
Can be easily remounted facing in any wind direction. With NEW Power-Core PLUS+ PMA Technology! Rain, ice and storm proof electronics.
PMA has no brushes, very dependable! True PMA for efficient power generation.
Comes with 6 carbon fiber composite blades. No slip rings to fail or replace. Aerodynamically tapered blades for maximum output.125,000 hours+ of rated bearing life. Wind Slave 1400 comes with one 6 point hub. / Ships UPS in One 9" X 7" X 37 Box.
1 steel heavy duty hub. 8 Black raven heavy duty high RPM wind blades with nuts and bolts for blades. A wind slave turbines are now supplied in mean green blades. They are stronger heavier duty.You will need the mounting timber or steel pole. Good quality multi-strand cable and battery. Don't forget to use inline fuse 30a.
The item "Wind Slave wind turbine system Survival easy fit easy to relocate anytime 12/24v" is in sale since Tuesday, June 14, 2016. This item is in the category "Business, Office & Industrial\Industrial Tools\Generators". The seller is "hornet-bestturbines-uk" and is located in Huddersfield. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.