400W Wind Turbine/Generator - 12V / 24V. With Charge Controller / Without charge controller. Low wind speed start-up : 2m/s.Blades : 3 pcs or 5pcs , White. If you need Black color blades , please leave us a message. Low start-up speed, high wind power utilization, light, cute, low vibration. Human-friendly design, easy to install and maintain. Blades using reinforced glass fiber, helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity.
Using patented permanent magnet generator and special stator, it effectively reduces torque resistance and guarantees the stability. Aluminum alloy body, synchronous permanent magnet generator. Oxidation of the wheel hub. Flange connection is more secure.
Dual-bearing design, low vibration, run more smoothly. The blades contain copper firmware. Please note : there is not any pipe/ tower and base included. Three phase permanent magnet ac synchronous generator. 1 wind turbine body; 2 flange seat ;3 steel pipe support ;4 wind turbine shaft; 5 wind wheel; 6 blade; 7 locknut; 8 fairing; 9 bolt ;10 flat washer; 11 resilient washer; 12 nut ; 13 stainless steel screws; 14 locking nuts; 15 rubber pad.The balde installed in the double holes , stainless stell bolts insert the holes. Use L wrench screw up the every stainless stell bolt. Mount the four flat gaskets on the four bolts , then insert the bolts into the holes corresponding to the flange. The three wires connected the transmission cable , each length of the spliced wire not less than 30mm , fastened the connectors with tape , the lengh is about 100mm. The flange seat installed in the tower , put Flat gasket and elastic gasket , tighten th nylon nut. The nut into the hexagonal hole, in the middle of the hub, placed on the spindle together , with the right hand fixed the wind whell , left hand counter-clockwise rotaing bolt , lock nut.
Diversion cover is corresponding to each blades , fasten tight the diversion cover. Before the three wires connection to the controller, please connect the battery to the controller. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter.
We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. It may not apply to countries with different tariff rules.
Please leave us message if you have any question, we will reply in 24 hours, thank you! The item "400W Wind Turbine Generator DC 12V 24V 3/5 Blade with windmill Charge Controller" is in sale since Tuesday, February 14, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits". The seller is "new-power2010" and is located in SHANGHAI. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.