Wind Turbine Generator

2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT


2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT
2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT
2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT
2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT

2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT    2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT

2000 Watt Dual Core PMG / 48 VAC three phase. LOW WIND SPECIAL MODEL WITH 7 BLADES. GREAT FOR AREAS WITH TREES AND WIND TURBULENCE SITUATIONS. Fits on any 2.5 steel pipe.

This model does not have a roller kit (for units with rollers see our other ads). Thermodyne 1600W Wind Turbine Review. Video will open in a new window.

Copy this link into Safari. TREX blades on SC12 PMA Wind Turbine windgeneering.

What's better, AC or DC wind turbine PMA's / PMG's. 24 V DC turbine with a 10-30V grid tie the BEST combo ever! Fits on both 1.5" sch #80 pipe or 2.5" sch #40 or #80 steel pipe and includes pipe adapters. The 2.5 pipe mount does not need guy wires which has advantages for tight installation spaces.

Zinc coated for rust proofing and can easily be painted your favorite c o l o r too. We call it the "Typhoon" since it is built to survive Typhoon winds.

Typhoon up-tilting turbines give maximum performance at all times and never stop making power even in the most stormy weather. Transitions from over speeding tilting protection and full power production are not interrupted by reset periods or the turbine listing off to one side or the other and not facing directly into the wind making full power. Also tails that yaw to the left or right tend to make wires twist inside since they favor to continue making left or right spinning loops. This makes the use of an expensive and often undependable slip ring necessary.

Turbines that "Up-Tilt" do not favor spinning to the left or right so twisting wires are not a concern in most areas with this type of turbine yaw mechanism. The unibody concept of the Typhoon wind turbine is unique. Other up tilting turbine designs had a PMA that up tilted but this caused the need for rubber bumpers as the PMA would come down rather hard and abruptly. The unibody design of the Typhoon is nicely counter balanced by the tail and whole body of the turbine allowing it to more gently pivot up and down as shown on the videos below.

The PMA is mounted in a tight box frame protecting it from flying debris or even a tower fall. This is a superior way to mount a PMA from the front and not the rear. While other turbines are snapping blades during storms the Typhoon will simply lift up and reduce 50% of its surface area allowing the wind to spill off the top of the turbine.

This wedge like shape also pushes the turbine downward holding the top plate tightly to the pole which prevents it from swinging around wildly in stormy winds. The Typhoon unibody up tilting wind turbine design has a U.

Patent pending number issued and we think it will be one of the most sought after turbines for years to come. WIND TURBINE 2000W COMMANDER DUAL 2.5 9 BLADE?? WIRE LARGE 74 8.4 kWh 2000 Watts / peak / 2200 RPM at peak load. (Zone4-5) Provides 252 kWh per month (3066kWh year) 8.4 kWh per day in a 12.8 mph (5.7 m/s) average wind speed. In a zone 7 area this turbine can make up to 200% more power or 16.8 kWh.

Wind Zones are defined by m/s Wind Zone 1 0 4.4 m/s Wind Zone 2 4.4 5.1 m/s Wind Zone 3 5.1 5.6 m/s Wind Zone 4 5.6 6.0 m/s Wind Zone 5 6.0 6.4 m/s Wind Zone 6 6.4 7.0 m/s Wind Zone 7 7.0 9.4 m/s (20-22 mph) Make sure your equipment can handle the peak voltages of each model. Batteries are good at absorbing high voltages as long as they do not go over their voltage limits and that is why are battery regulators are critical to match with our turbines. We sell many models as long as the voltages match. For all 12V rated Mode (90V peak in extreme wind gusts) For all 24V rated Mode (176V peak in extreme wind gusts) For all 48V rated Mode (300V peak in extreme wind gusts). 14 magnet none-cog Super-Core PMA/PMG. You will receive only the most modern magnet core with deep saturation slotted magnets providing deep reaching pole power into the stator coil for maximum amperage. KT blades make this turbine the most powerful clear on the market. Rain, ice and storm proof electronics. PMA has no brushes, very dependable! True PMA for efficient power generation.

No slip rings to fail or replace. Aerodynamically tapered blades for maximum output. / Ships UPS in One 9" X 9" X 46 Box.

There are plenty of "Look-A-Like" PMA's on the market that cost less. Spend a little more and get a LOT more BANG-FOR-YOUR-BUCK!!! Powered by Hornet Power Systems. The item "2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT" is in sale since Thursday, December 21, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Wind Power Supplies\Wind Turbines & Kits".

The seller is "wind_turbine_generator" and is located in Lancaster, California. This item can be shipped to United States.

  1. Model: Wind Turbine Generator g5th7658z
  2. Country/Region of Manufacture: Unknown
  3. MPN: Wind Turbine Generator
  4. Brand: windmill thermodyne


2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT    2000 WATT Typhoon 48VAC Tilting Unibody 2.5 Wind Turbine Generator 7KT